Ok to pot plate chokes?

Jim R. · 3664

0 Members and 1 Guest are viewing this topic.

Offline Jim R.

  • Hero Member
  • *****
    • Posts: 2194
  • Blind Bottlehead
on: October 03, 2010, 08:15:34 AM
I'm considering putting covers over the plate chokes and wonder if I were to make boxes out of wood, would it be alright to pot the chokes in the boxes?

Thanks,

Jim

Jim Rebman -- recovering audiophile

Equitech balanced power; uRendu, USB processor -> Musette DAC -> 5670 tube buffer -> Finale Audio F138 FFX -> Cain and Cain Abbys near-field).

s.e.x. 2.1 under construction.  Want list: Stereomour II

All ICs homemade (speaker and power next)


Offline Paul Joppa

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 5833
Reply #1 on: October 03, 2010, 08:35:41 AM
They have to dissipate about 1.5 watts of heat. The materials are mostly pretty good, rated 155C, but I try to not exceed a copper temperature of 100C. I'm too lazy to try to make good thermal models, but at least it's easy to measure the change in DC resistance. Remember it takes several hours to get to thermal stability with typical transformers.

I hesitate to suggest it except as a joke - you could pot them in paraffin or other low-temperature wax, and wait to see if it melts and runs out all over the circuit and table! The alternative is to find a potting compound with high thermal conductivity.

For what it's worth, Mike at Magnequest does not like potting, partly because most materials used have poor dielectric properties. When pushed he will sometimes suggest air as the superior potting compound.

Perhaps a perforated or mesh cover would be a good approach?

Paul Joppa


Offline Jim R.

  • Hero Member
  • *****
    • Posts: 2194
  • Blind Bottlehead
Reply #2 on: October 03, 2010, 01:32:48 PM
Paul,

Yes, maybe a mesh or perforated cover would be better.  I actually don't like working with potting compounds myself.

I'm sure I'll come up with something...

-- Jim

Jim Rebman -- recovering audiophile

Equitech balanced power; uRendu, USB processor -> Musette DAC -> 5670 tube buffer -> Finale Audio F138 FFX -> Cain and Cain Abbys near-field).

s.e.x. 2.1 under construction.  Want list: Stereomour II

All ICs homemade (speaker and power next)