Where to buy new UF4007 rectifier diodes

[email protected] · 1668

0 Members and 1 Guest are viewing this topic.

Offline [email protected]

  • Newbie
  • *
    • Posts: 2
on: September 22, 2018, 04:11:03 PM
Hi,

I was stupid and cut one of the UF4007 diodes that came with the Crack kit too short and am in need of buying a new one.
Are there any specific requirements I need on these UF4007 or any UF4007 is fine?

Thanks!



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19772
Reply #1 on: September 22, 2018, 05:23:25 PM
Any old UF4007 is going to be just fine.  Your local parts store may carry NTE parts, and the NTE575 is equivalent.   

In a pinch, you should very easily be able to find the following diodes at the local electronics shop that will also work OK:

1N4007, 1N4006, 1N4005

There are hundreds that will actually work, but only a couple that are as good or better performing than the UF4007.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline [email protected]

  • Newbie
  • *
    • Posts: 2
Reply #2 on: September 23, 2018, 05:09:21 AM
Any old UF4007 is going to be just fine.  Your local parts store may carry NTE parts, and the NTE575 is equivalent.   

In a pinch, you should very easily be able to find the following diodes at the local electronics shop that will also work OK:

1N4007, 1N4006, 1N4005

There are hundreds that will actually work, but only a couple that are as good or better performing than the UF4007.

Thank you!