Resistance check question [resolved]

oguinn · 2947

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline oguinn

  • Global Moderator
  • Sr. Member
  • *****
    • Posts: 896
on: January 28, 2019, 01:05:39 PM
Running the resistance checks right now. Everything’s looking good except for 49 and 54, which are coming up OL instead of 0. Any ideas about what might cause that?
« Last Edit: January 28, 2019, 02:07:46 PM by Paul Birkeland »

Jameson O'Guinn

-

Main System: Schiit Bifrost MB, Rega Planar 6 with Exact cartridge, Eros 2, BeePre, Kaiju/Stereomour II, Jagers, Mainline

Desktop System: Crack with Speedball

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #1 on: January 28, 2019, 01:21:11 PM
Usually that happens when you paint the transformer cover and the screws don't bite through.  Nothing connects to those terminals, so there's no need to attempt to remedy the situation.

-PB

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline oguinn

  • Global Moderator
  • Sr. Member
  • *****
    • Posts: 896
Reply #2 on: January 28, 2019, 01:22:27 PM
Got it. As long as it’s no big deal I won’t rip the transformer bell apart and sand it. Good to know for the next build, though. Thanks, Paul!

Jameson O'Guinn

-

Main System: Schiit Bifrost MB, Rega Planar 6 with Exact cartridge, Eros 2, BeePre, Kaiju/Stereomour II, Jagers, Mainline

Desktop System: Crack with Speedball

Pages: 1   Go Up
« previous next »