Recent V-cap install in Paramount.

glynnw · 4896

0 Members and 1 Guest are viewing this topic.

Offline glynnw

  • Full Member
  • ***
    • Posts: 162
on: October 25, 2010, 11:38:09 AM
Saturday I installed a pair of .1 uF 600V teflon V-caps as coupling caps in my Paramounts, replacing a pair of Russian teflons I had been using for about 6 months.  Before install, I burned the V-caps in for 200+ hours using Grainger's suggested method.  As the kids say, OMG!  I wish I could say the Russian caps were close, but there is simply no comparison.  For the past 2 days I have been mesmerized, replaying songs I have played hundreds of time and hearing a substantial amount of new info in almost every case.  Bass where I didn't know it existed.  Pianos sound much better.  Male vocals have less of a mid-bass thickness that had been bothering me on some songs.  On one of the Art of Noise pieces I was able to understand words in the background that I had never noticed before.  And I can't really verify this, but they seem to sound better with every additional hour of use.  At a cost of about $120, this is one of the most cost effective things I have done.

PC, J River software, opticaRendu, Schitt Ygg DAC,Tortuga Pre, Torta Radu tube buffer, Linear Tube Audio ZOTL10, Spatial Audio X5w/pair of GR Research dual 12" open baffle servo subwoofers tamed by DSpeaker Dual-Core DSP , Audience AU24 SE  spkr cable, handmade silver interconnects,


Offline Jim R.

  • Hero Member
  • *****
    • Posts: 2194
  • Blind Bottlehead
Reply #1 on: October 25, 2010, 11:58:16 AM
Glynn,

When they get to about 500-600 hours they will be even better and will continue to improve up to 1000 hours, though the changes will be more subtle.

I'm seriously considering a pair of the copper/teflons for my Stereomour.

-- Jim

Jim Rebman -- recovering audiophile

Equitech balanced power; uRendu, USB processor -> Musette DAC -> 5670 tube buffer -> Finale Audio F138 FFX -> Cain and Cain Abbys near-field).

s.e.x. 2.1 under construction.  Want list: Stereomour II

All ICs homemade (speaker and power next)


Offline Grainger49

  • Hero Member
  • *****
    • Posts: 7175
Reply #2 on: October 26, 2010, 06:35:01 AM
Glynn,

Sounds like you are enjoying the new caps.  And you got them for a good price too!  (I see them for $124 ea. and ~$82 ea. at PCX)

They are cheaper than iron and sometimes approach the sound of better iron.

Keep us posted.
« Last Edit: October 27, 2010, 04:42:09 AM by Grainger49 »



Offline Japhy

  • Jr. Member
  • **
    • Posts: 30
Reply #3 on: October 30, 2010, 07:57:15 PM
I just put in some 0.1uF ampohm FE-XAL in my S.E.X. about a month ago and my my!!!  Didn't know a shift in this position could make such an impact.  Lively, spacious, real.....I'd try v-caps save for the price.  I picked up a set of 1.0uF for the other position.....they are big so I have to move things around.  Already build a lower deck to my rig to house a couple ASC 50uF's for the power supply....another whopper of an improvement.  I know what Grainger means now about how far you can go before doing the iron upgrade.  I'm hearing things now that I didn't know were there.

Cheers!