PT-10 Power Transformer Sticky

iroh · 1340

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline iroh

  • Newbie
  • *
    • Posts: 2
on: October 02, 2019, 06:00:45 PM
I just received my Crack and the bubble wrap is stuck to the side of the PT-10 transformer with some tape residue. What’s the best way to clean this? Sorry I am new to this and just didn’t want to damage the component in any way.


Deke609

  • Guest
Reply #1 on: October 03, 2019, 02:25:24 AM
Try a hairdryer.  Or a heat gun on an low heat setting. If the heat gun isn't adjustable, hold it farther away from the transformer.  The heat won't damage the transformer.

cheers, Derek


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19766
Reply #2 on: October 03, 2019, 04:54:12 AM
Rubbing alcohol or mineral spirits may also take it right off without disturbing the transformer varnish.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline iroh

  • Newbie
  • *
    • Posts: 2
Reply #3 on: October 03, 2019, 02:36:40 PM
Thank you! I'll try those out


Pages: 1   Go Up
« previous next »