What's the name for a standalone ground post?

[Deke609]

The kind you find on the back of some components for connecting chassis ground to something else (house ground or chassis ground of another component)?  I need search terms for Mouser/Digikey.

I know I could just use a screw, banana jack, etc. but I'd like one of the dedicated posts that you tighten either by finger (knurled) or screwdriver. Just to be fancy 

MTIA, Derek

[mcandmar]

Grounding post

[Deke609]

Thanks, but I tried that and variants thereof with no luck. It turns up very large copper fixtures for creating a house ground on copper plumbing (which I may in fact buy to replace the cheap aluminum one in my house that is covered in galvanic corrosion - but that's a different problem).

So no luck, still stuck.

[Paul Birkeland]

It's an uninsulated binding post.

[Deke609]

Success! Many thanks PB.

cheers, Derek

[EricS]

Here is the one I used on my turn table preamp.  This one is insulated, so you have greater flexibility in mounting it:

https://www.mouser.com/ProductDetail/Johnson-Cinch-Connectivity-Solutions/111-0103-001/?qs=%2Fha2pyFaduiRA8ZBA48hsHC7q%252BO%2F4UTog3cAE8OvmZFlczSJ%252BtSrDA%3D%3D

Edit to add a somewhat fuzzy image

[Deke609]

Thanks Eric. I went with a knurled version by the same company: http://www.mouser.com/ProductDetail/Johnson-Cinch-Connectivity-Solutions/111-2223-001/?qs=ALatB1zlu3DK4UDroTueLA%3D%3D

cheers, Derek