0 ohm resistors

joralieu · **on:** March 15, 2021, 10:10:01 AM

Can I use a wire instead of the 0 ohm resistors on page 54 ?

Paul Birkeland · **Reply #1 on:** March 15, 2021, 10:28:12 AM

You can, but you don't need to.

joralieu · **Reply #2 on:** March 15, 2021, 12:54:13 PM

Okay, why are they used there.

Paul Birkeland · **Reply #3 on:** March 15, 2021, 01:17:48 PM

Stripping really short pieces of the teflon covered wire can be really difficult, so using a jumper is preferable.

joralieu · **Reply #4 on:** March 15, 2021, 01:59:02 PM

Thanks

Tubegopher · **Reply #5 on:** March 15, 2021, 04:57:00 PM

OK Paul... a little Deja Vu! It does cause some questions

Paul Birkeland · **Reply #6 on:** March 16, 2021, 06:06:58 AM

They've been in the kits for 7 years, but there does seem to be a fair amount of recent interest.