Use stereomour ii as preamp?

peterq · 1451

0 Members and 1 Guest are viewing this topic.

Offline peterq

  • Jr. Member
  • **
    • Posts: 22
on: April 03, 2021, 01:41:12 PM
Hi,
I'm new to this forum, recently I bought a used stereomour ii for my headphone. May I use it as a preamp to? Is there necessary mod should be done before working as preamp? Thanks.



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19745
Reply #1 on: April 04, 2021, 05:47:28 AM
You can try it as a preamp.  You may find that the noise floor isn't low enough depending on the rest of your system.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline peterq

  • Jr. Member
  • **
    • Posts: 22
Reply #2 on: April 04, 2021, 04:10:28 PM
Thanks Paul, I will give it a try.



Offline peterq

  • Jr. Member
  • **
    • Posts: 22
Reply #3 on: April 10, 2021, 09:17:59 PM
I tried this today. Pair with my Genelec 8030, I must say the result is very positive. The sound stage is more bigger than before and I can feel a bit more airy, not as my previous 6sn7 based amp but still good.
For the hum, I can decrease the speaker volume and make hum noise cannot be heard.