Which turntable?

[Jameson]

Is this the Sowter SUT you recommend (with threaded grommets): 1990 1:10/1:20 Low Z Cartridge Transformer

[Paul Birkeland]

Yes, 1990s wired for 1:20 should be OK.  If you're using that cartridge on a Rega arm and you experience hum, let me know, as there are some mods that can be done to separate the shield and signal cold in the tonearm wiring.

[Jameson]

Thanks PB. Still in the research stage. Considered going with a P6/Ania but wasn’t factoring in the $350ish extra for the SUTs. Probably be a couple months.

[Paul Birkeland]

You could get a P6 with a MM cart, then put the Sowters on order and enjoy the table while they are made.  It will take some time to get them!

[Jameson]

Picked up a demo unit Rega P6 with the MM cartridge. I can wait to upgrade to the MC and SUTs later. Thanks for the advice.

[Jameson]

Rega P6 is in. Great sounding table! Good match with the Eros 2 - at least with the MM cartridge. I really thought that Schiit turntable sounded great, but this is much better.