Re: Terminal 9 & B6's voltage on Crack [solved]

Macauu171 · 1062

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Macauu171

  • Newbie
  • *
    • Posts: 2
on: April 28, 2022, 07:26:24 AM
I have the same problem with B6 and T9 having `~150v, checked the wiring, it was good and also the notch on the octal socket faces the front of the amp. Any other problems that might have caused this? I tested it, right driver is the only one working but it plays the left channel.


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19772
Reply #1 on: April 28, 2022, 07:30:29 AM
You can always start a fresh post rather than bringing one back from the dead.

Can you post some build photos? What are the voltages on terminals 1-5?

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Macauu171

  • Newbie
  • *
    • Posts: 2
Reply #2 on: April 28, 2022, 04:49:30 PM
Sorry about that, my bad, I connected b6 to b2 instead of b5 to b2, it's all good now, thanks!


Pages: 1   Go Up
« previous next »