Voltage Check Issue - 7/8/9 measuring 155v [resolved]

Immanence · 1173

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Immanence

  • Jr. Member
  • **
    • Posts: 15
on: April 29, 2022, 07:07:42 AM
Posting a new thread, because a separate issue. Resistance passes checked. On to voltage check. Everything was good except for 7/8/9, which measured at 155v.

155v is too high for one, and I didn't get 0v out of 8. Which is again weird because there is no connection there. Could I have power running into the chassis itself?
« Last Edit: April 29, 2022, 01:15:10 PM by Paul Birkeland »


Offline Immanence

  • Jr. Member
  • **
    • Posts: 15
Reply #1 on: April 29, 2022, 08:41:31 AM
Okay, I reflowed some joints and ALL CHECKS ARE PASSING CONSISTENTLY. WOO.

I also tested with some nicer probes. I was really trying to alligator it, but I think the clamps I got are pretty sub-par. I have some nice tips from the DMM, tried those and got better readings.

Going to move on to listening test...


Offline Immanence

  • Jr. Member
  • **
    • Posts: 15
Reply #2 on: April 29, 2022, 09:11:56 AM
Listening to Public Service Broadcasting - Go!

Seems appropriate.


Offline Mucker

  • Sr. Member
  • ****
    • Posts: 392
Reply #3 on: April 29, 2022, 06:55:13 PM
Good job and enjoy!


Pages: 1   Go Up
« previous next »