Running the HE1000v2 with the Crack

calmiswar · 1162

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline calmiswar

  • Full Member
  • ***
    • Posts: 69
on: June 04, 2022, 06:57:04 PM
Hello guys,

I've been a long time user of the Crack now and I really love it!
Mostly use it to drive my HD800.
I recently acquired Hifiman HE1000v2 and just out of curiosity, I connected it to Crack, and to my surprise, it actually sounds great!
But it got me wondering if connecting such a low impedance planar to the Crack would be harmful to the Crack.
FYI, it has a rated impedance of 35Ω and sensitivity of 90dB/mW

Would really appreciate your help,
Thanks!
« Last Edit: June 04, 2022, 07:49:19 PM by calmiswar »


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19757
Reply #1 on: June 05, 2022, 04:40:12 AM
It won't harm the Crack but output will be limited and damping will be pretty poor.  The impedance curve of the HE1000 is a flat line, so the damping problem is certainly less of a problem.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9659
    • Bottlehead
Reply #2 on: June 05, 2022, 06:34:05 AM
This is why we make several different headphone amps. The S.E.X. amp would be a very fine match to the HE1000V2, and the Mainline would probably work well too.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Pages: 1   Go Up
« previous next »