High Raw B+ voltage

Happy Ghost · 1390

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Happy Ghost

  • Full Member
  • ***
    • Posts: 155
on: July 11, 2022, 04:29:35 AM
Hello,

I am getting a slightly higher B+ voltage (~ 326.3V) than what is recommended in the manual. My incoming A/C voltage is 120.5V. From previous posts regarding this issue, it should not be a show stopper and I can move along. But just wanted to confirm once more.

Thanks!

Atul

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19745
Reply #1 on: July 11, 2022, 04:30:57 AM
Yes, I would go ahead and keep building. Just be sure that the incoming AC wiring is hooked up properly for the instructions for that voltage range in the manual.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Happy Ghost

  • Full Member
  • ***
    • Posts: 155
Reply #2 on: July 11, 2022, 04:46:44 AM
Thanks Paul! Yes.. the transformer windings were done correctly. There were no issues also in the power transformer secondary test. I was getting 9.48 VAC and 119.6 VAC there ...

Atul

Offline BrianMid

  • Newbie
  • *
    • Posts: 6
Reply #3 on: July 24, 2022, 02:59:16 PM
Yeah, I am getting 320-321.6 VDC for 123.3V.


Pages: 1   Go Up
« previous next »