question about installation of 0.1 uf capacitor

[Big Bamboo]

I made a boo boo.

At the top of page 48 of the sex manual it says to run the second lead of the 0.1 uf capacitor through 2L to A11 after covering it with heat shrink tubing.

I didn't read ahead and mistakenly amputated the lead at 2L.

My question is: Do I need to order a new capacitor, or can I simply run a piece of insulated wire from 2L to A11?

Thank you,

John 

[Paul Birkeland]

You can just use a piece of wire.