How to replace pin on resistor

Swollazn · 1254

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Swollazn

  • Jr. Member
  • **
    • Posts: 34
on: August 30, 2022, 12:45:29 PM
One of my pins broke off the big 10w 3k resistor. I tried to solder it back on but that wouldn't work.


Anyone have any ideas how to fix this





Offline Swollazn

  • Jr. Member
  • **
    • Posts: 34
Reply #1 on: August 30, 2022, 12:57:21 PM

3K ohm 3KRΩJ 10 watt Axial Ceramic Cement Power Resistor 10W

Can i purchase this off amazon and achieve the same thing?


Online Thermioniclife

  • Sr. Member
  • ****
    • Posts: 794
Reply #2 on: August 30, 2022, 01:32:07 PM
If it is broken off at the body of the resistor you are S.O.L. contact Eileen at Bottlehead for a replacement or order one from a supplier like Mouser. but you will probably save money by ordering from Bottlehead.

Lee R.

Offline Swollazn

  • Jr. Member
  • **
    • Posts: 34
Reply #3 on: August 30, 2022, 05:05:45 PM
I ordered a replacement from amazon, it should be the same (ceramic resistor with same specs). But I emailed them just in case if that would work.


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19770
Reply #4 on: August 31, 2022, 04:35:11 AM
If it's a 10W 3K resistor and it fits in the space provided, it will likely work just fine.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Pages: 1   Go Up
« previous next »