Broken HLMP-6000 LED

micheld · 2356

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline micheld

  • Newbie
  • *
    • Posts: 3
on: January 18, 2024, 04:06:38 AM
Morning
One of the HLMP-6000 LED is broken
What are my options?
- replace with a solid wire
- replace with a diode
- try to source a new HLMP-6000 LED

Thanks

michel d


Offline Larpy

  • Full Member
  • ***
    • Posts: 230
Reply #1 on: January 18, 2024, 04:37:04 AM
Broken as it arrived in the kit broken in two?  If so, contact Bottlehead and they'll send you a replacement.

Broken meaning it broke into two when you attempted to solder it into the circuit?  If so, you'll need a replacement.  (Do not use a piece of wire or another diode.)  You can order replacements here:  https://bottlehead.com/product/hlmp-6000-leds-prod/


« Last Edit: January 18, 2024, 04:40:47 AM by Larpy »

Larry

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19757
Reply #2 on: January 18, 2024, 06:26:18 AM
It is possible to temporarily install a wire between A3 and A8 to get your kit up and running, but you should put the second diode back in when you can.  Doing this workaround will reduce the available information if you run into problems as well.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Pages: 1   Go Up
« previous next »