Balanced cable in Crack

Lee Hankins · 2349

0 Members and 1 Guest are viewing this topic.

Offline Lee Hankins

  • Full Member
  • ***
    • Posts: 165
on: August 27, 2011, 02:28:47 PM
One more Crack upgrade, my Crack is getting so cluttered I can't see the bottom of the top place from underneath.  For balanced cables I plan to use a 4 pin connector and of course a new cable, but the main question is where the two grounds should be connected in the Cracks circuit.

Doc, I sure hope that the Crack is the last of the 6 X 10 top plates, a real pain in the ass especially when the first mod was installing 100uf film and foil caps.  It seems that one of the main reason that one purchases a Bottlehead products is the excellent design and performance and for someone like myself first and foremost has become the ability to modify the existing design with the help of this forum.  Actually modification and experimentation is encouraged here by Doc and Paul.

Again, the question of the moment is where the cable grounds should be connected in the Cracks circuit.

Lee Hankins
"End of the Road"
Homer, Alaska