Trying to get a choke to fit in the crack

crackuser · 2354

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline crackuser

  • Jr. Member
  • **
    • Posts: 34
on: September 20, 2011, 08:26:01 AM
I am having a hard time trying to get this choke to fit between the first and second capacitors. I have tried up and down, sideways, diagonal and nothing works. How are you guys getting them to fit? I even took a picture to show one of these dang chokes that just wont fit.


(https://forum.bottlehead.com/proxy.php?request=http%3A%2F%2Fimg683.imageshack.us%2Fimg683%2F1014%2Fp1000295v.jpg&hash=1cf11a46e61bcdcab4e2f255e3953c956cfffebe)


Offline 2wo

  • Hero Member
  • *****
    • Posts: 1261
  • Test
Reply #1 on: September 20, 2011, 09:59:10 AM
Throw it in the dryer, till it shrinks a bit...John

John S.

Offline Grainger49

  • Hero Member
  • *****
    • Posts: 7175
Reply #2 on: September 20, 2011, 10:01:45 AM
Well I see your problem, it has too many leads.  You are going to have to sort that out before trying to squeeze it under the hood. 

I would suggest some top plate bracing when you get to the last step.


Offline crackuser

  • Jr. Member
  • **
    • Posts: 34
Reply #3 on: September 20, 2011, 04:51:44 PM
O.K. Got it!! Throw in the dryer,use some cable management, and take it to the welding shop. Thanks guys!
« Last Edit: September 20, 2011, 04:54:03 PM by crackuser »


Pages: 1   Go Up
« previous next »