Goldpoint selector switch

John Roman · 2062

« previous next »
Pages: 1   Go Down

0 Members and 2 Guests are viewing this topic.

Offline John Roman

  • Sr. Member
  • ****
    • Posts: 392
on: October 10, 2011, 07:05:46 AM
Good morning everyone,
I'm going to replace the sweetest whispers attenuators and selector switch in my EFP3 with some Goldpoints. The stock selector switch seems to be a 3 pole, 3 position. I see in the archives that PJ recommended a 4 pole 3 position. Why the extra pole?

Regards,
John
Extended Foreplay 3 / 300B Paramount's / BassZilla open baffle/ Music Streamer 2 / Lenovo Y560-Win7-JRMC & JPlay

Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9658
    • Bottlehead
Reply #1 on: October 10, 2011, 07:08:22 AM
Both the hot and the cold of each channel is switched, to reduce popping. Thus you need four poles. The stock selector switch is a four pole three position switch.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Offline John Roman

  • Sr. Member
  • ****
    • Posts: 392
Reply #2 on: October 10, 2011, 08:36:19 AM
ThankYou Doc!

Regards,
John
Extended Foreplay 3 / 300B Paramount's / BassZilla open baffle/ Music Streamer 2 / Lenovo Y560-Win7-JRMC & JPlay

Pages: 1   Go Up
« previous next »