Output impedance

vetmed · 2649

« previous next »
Pages: 1   Go Down

0 Members and 2 Guests are viewing this topic.

Offline vetmed

  • Full Member
  • ***
    • Posts: 245
on: November 27, 2012, 05:44:32 PM
I don't have my assembly manual handy, can I set the output to 16 ohms?

TIA

Robert Lees

Robert Lees

Offline Paul Joppa

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 5833
Reply #1 on: November 27, 2012, 06:17:01 PM
Yes.

Paul Joppa

Offline vetmed

  • Full Member
  • ***
    • Posts: 245
Reply #2 on: November 28, 2012, 06:08:45 AM
Thanks Paul, I'm considering the purchase of a pair of Quad 57 and it seems they work best with the 16 ohm tap.



Robert Lees


Robert Lees

Offline Paul Joppa

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 5833
Reply #3 on: November 28, 2012, 07:16:18 AM
Here's a switch so you can try them all. It calls for a 3-position, 2-pole switch. I fit one in next to the output binding posts on an early prototype.
« Last Edit: November 28, 2012, 07:19:16 AM by Paul Joppa »

Paul Joppa

Pages: 1   Go Up
« previous next »