Shorting plugs for hum balance

Natural Sound · 1904

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Natural Sound

  • Sr. Member
  • ****
    • Posts: 998
on: December 11, 2012, 07:53:48 AM
Hi guys, I know this has been discussed before. However a search of the forum has been less than fruitful. As I recall the term "shorting plug" is a bit of a misnomer. By that I mean that you don


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19751
Reply #1 on: December 11, 2012, 08:38:29 AM

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline RickS

  • Jr. Member
  • **
    • Posts: 17
Reply #2 on: December 11, 2012, 09:03:21 AM
This is the information I found very useful:

http://www.bottlehead.com/smf/index.php?topic=586.0

Rick

Foreplay III, Stereomour w/ JJ 2A3-40 and Psvane 12AT7 tubes
Blumenstein Orca FE83-SOL speakers / sub
BH power cables & interconnects
HP Stream 11 running WTFPLAY, Supra USB to Teac UD-301 DSD DAC
Rega Planar 2, AT95SH RigB9 cartridge, GT subplatter, 24V motor, SRM-Tech Silent Base
Seduction w/ C4S

Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9658
    • Bottlehead
Reply #3 on: December 11, 2012, 11:59:32 AM
The critical thing here is that we are talking about plugs for shorting the INPUT. Those can indeed (and should be) a dead short. But they are not for loading outputs.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Offline Natural Sound

  • Sr. Member
  • ****
    • Posts: 998
Reply #4 on: December 11, 2012, 04:58:09 PM
Thanks guys.


Pages: 1   Go Up
« previous next »