I didn't mention befire that I blew the fuse on my first power up. I looked at the assembly - seemed ok -
so I tried another fuse and it came up. Then listened to it for a few hours last night. This morning,
it powered up and I listened for about 15 minutes. Then powered down for two hours. Then I blew the fuse
again on powerup.
The parts list says its a 1A slo-blo GMA fuse. On the fuse it says F1AL 250V. When I look online, several places indicate
that the F is for fast blow and slow blow has a T. First, is this correct? Second, if so, am I masking a problem by using a slo-blow?
I'm guessing not. But, if the F1AL is a slow blow, then I have a problem.
The voltages follow. By the way, the sound at 70-80dB is, well, stunning.
pin spec mine
11 146 145.9
12 0 0
13 0 0
14 0 0
15 186 184
16 5 5.06
17 90-110 97.5
18 0 0
19 9.85 9.81
20 0 0
21 0 0
22 213 211.2
23 0 0
24 0 0
25 213 210.5
26 0 0
27 0 0
28 0 0
29 6.8 6.73
30 6.8 6.73
31 13.6 13.5
32 0 0
33 0 0
34 13.6 13.56
35 6.8 6.76
36 6.8 6.74
37 0 0
38 0 0
39 0 0
40 213 210
41 0 0
42 0 0
43 213 210
44 0 0
45 0 0
46 213 209.5
47 n/a
48 0 0
49 0 0
50 n/a
51 0 0
A1 risky
A2 0 0
A3 90-110 95
A4 risky
B1 risky
B2 0 0
B3 90-110 97
B4 risky
C1,D1 n/a
C2,D2 0 0,0
C3,D3 3.5-4.5 4.27, 4.48
C4,D4 n/a
C5,D5 n/a
C6,D6 n/a
C7,D7 147 146,146
C8,D8 n/a
C9,D9 147 146,146
Thanks!
