Another battery thread

Paul Joppa · 3607

0 Members and 1 Guest are viewing this topic.

Offline Paul Joppa

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 5833
on: January 26, 2013, 10:40:05 AM
I was at Costco yesterday, and stopped to check out the batteries. Eight 9-v for $16 - better than the drugstore but still not cheap. But the I noticed they had forty AA cells for the same price. It takes 24 cells to make a nominal 36-v battery, but AA cells have about 4 times the mAh current capacity.

I didn't go any further with this, just something to think about.  :^)

Paul Joppa


Offline Jim R.

  • Hero Member
  • *****
    • Posts: 2194
  • Blind Bottlehead
Reply #1 on: January 26, 2013, 10:51:27 AM
So, it seems that if the nominal supply voltage was reduced to 30v that could work out to be both cost effective and just a lot more convenient overall. (for non-rechargeables).

Time to go do some research on AA holders :-).

-- Jim

Jim Rebman -- recovering audiophile

Equitech balanced power; uRendu, USB processor -> Musette DAC -> 5670 tube buffer -> Finale Audio F138 FFX -> Cain and Cain Abbys near-field).

s.e.x. 2.1 under construction.  Want list: Stereomour II

All ICs homemade (speaker and power next)


Offline corndog71

  • Sr. Member
  • ****
    • Posts: 593
Reply #2 on: January 26, 2013, 12:20:18 PM
If I remember correctly a 9V is actually made up of 6 AAAA batteries which would explain the lower current capacity.

The world was made for those not cursed with self-awareness.

Rob


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #3 on: January 26, 2013, 01:07:56 PM

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline Grainger49

  • Hero Member
  • *****
    • Posts: 7175
Reply #4 on: January 26, 2013, 02:54:57 PM
Paul,

Thanks for the links.  I'll start stocking up for home from there.



Offline Zimmer64

  • Full Member
  • ***
    • Posts: 210
    • Blog
Reply #5 on: January 27, 2013, 08:57:44 AM
I went with 2 sets of re-chargeable's from Maplin in the UK. A pack of three 9v is just

Nelson Pass F5 Turbo V2, Quickie (mod), S.E.X. 2.1, Tubes4hifi SP14, Dynaco VTA ST 70, Tubelab SSE, Vroemen Diva Superiore ER4, Jordan JX92S VTL, 47 labs 0647 CD, Aqvox DAC, Rowen Absolute pre / psu / power amps, BG Neo3 / Betsy / Eminence A15 open baffles


Offline mortron

  • Jr. Member
  • **
    • Posts: 44
Reply #6 on: February 12, 2013, 08:50:56 AM
Was at the local HomeDepot picking up some 9v and found a pack of 48 AA batteries for $11. Currently looking at one of the ugliest 38v battery packs I've ever seen... Primarily because I've only seen one. But for $5.50 its worth trying out...

How long do those $0.25 GI brand 9V batteries last? Anyone used some yet?

So I tried it, and assuming it was hooked correctly, I got crackling in my speakers when adjusting the input pots on my power amp...not too sure what Isis wrong there. The positive and negative of the leads run each to the centre most two battery terminal connections, one each on a separate battery holder, correct?
« Last Edit: February 12, 2013, 10:29:10 AM by mortron »



Offline jvmonta

  • Newbie
  • *
    • Posts: 9
Reply #7 on: April 02, 2013, 05:02:10 PM
Got my Quickie 1.1 built over the weekend. Found these really cool yellow alkaline batteries at IKEA, $1.99 for 9V, 2 pack of D cells $1.99.



Offline coca

  • Full Member
  • ***
    • Posts: 141
Reply #8 on: April 03, 2013, 05:32:29 AM
I googled Black and Decker 36 volt battery and found this:
BLACK AND DECKER 36 VOLT MAX LITHIUM BATTERY
BATTERY MILLIAMP HRS 1500
CHARGE TIME 1HR
FOR USE WITH BLACK AND DECKER CORDLESS ITEMS
PRICE $89.00
This is food for thought.

Bernie.



Offline braubeat

  • Full Member
  • ***
    • Posts: 110
Reply #9 on: April 03, 2013, 06:39:38 AM
As long as we are looking check these out. You only need 10.

http://www.batteryjunction.com/14500-category.html



Offline earwaxxer

  • Hero Member
  • *****
    • Posts: 1336
Reply #10 on: April 03, 2013, 07:08:05 AM
Or this one - some wiring required and a special charger - only two required!
http://www.hobbypartz.com/77p-sl500-4s1p-20c-4444.html

Eric
Emotiva XPA-2, Magnepan MMG (mod), Quickie (mod), JRiver, Wyrd4sound uLink, Schiit Gungnir, JPS Digital power cord, MIT power cord, JPS Labs ultraconductor wire throughout, HSU sub. powered by Crown.