Quickie 1.1/PJCCS Question

willspeed · 2181

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline willspeed

  • Jr. Member
  • **
    • Posts: 32
  • Tropically Twisted
on: April 04, 2013, 06:58:08 AM
Hey guys,

I'm looking at the Quickie manual on page 20 - and by looking at the pictures, shouldn't step 4 on this page state to wire from B2 to 6L?

Thanks,

Will

Will G.

S.E.X. w/C4S driving SEXy speakers
Seduction w/C4S
Quickie 1.1/ PJCCS
Rega Planar 2 / R200 Tonearm / Ortofon 2M Red / RB250 Tonearm / Ortofon 2M Blue
Tode / Taylor 110 / Taylor 214ce / 94 Tele Tex-Mex Special / Home-hacked Squire Strat / 86 Guild F46NT / Which one next?

4krow

  • Guest
Reply #1 on: April 04, 2013, 09:27:00 AM
If I read the schematic correctly, tube pins 2,4,6 are the same electrically. Is that the question you are asking?


Offline Magnetron

  • Newbie
  • *
    • Posts: 3
  • I took things apart when I was a kid.
Reply #2 on: April 16, 2013, 05:49:23 PM
I went with pin 6 on both tubes, for uniformity.

P. Bond

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #3 on: April 16, 2013, 06:02:53 PM
No, the wire should be run as indicated.

If you install the PJCCS, this will aide in installation.

-PB

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Pages: 1   Go Up
« previous next »