New Build with a Tube Issue?

Tim G. · 6185

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Tim G.

  • Jr. Member
  • **
    • Posts: 48
on: May 04, 2013, 03:28:45 PM
Just finished up my Seduction kit and have been doing resistance and voltage checks.  Everything looks to be in pretty good shape, no smoke!  But, when I checked the voltages the B+ on one of the tubes is higher than stated.

A3, B3, A8, B8 are all good at about 1.56V
Pin 1&6 of one tube is good around 80V but the other tube measures around 100V, swap the tubes and high voltage follows the tube.

Is this something that will settle down after the tube has been on for a while?  Or is there something more going on?

Thanks for any tips!
Tim


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19744
Reply #1 on: May 04, 2013, 03:47:05 PM
That could settle down after 50-100 hours, but it should operate as-is.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Tim G.

  • Jr. Member
  • **
    • Posts: 48
Reply #2 on: May 04, 2013, 03:49:35 PM
Awesome, time to spin some vinyl!

Thanks


Offline Grainger49

  • Hero Member
  • *****
    • Posts: 7175
Reply #3 on: May 05, 2013, 12:35:53 AM
Tim,

That is stunning work!  You are in competition with Wardsweb.  It would make a good model for a manual. 


Offline Tim G.

  • Jr. Member
  • **
    • Posts: 48
Reply #4 on: May 05, 2013, 02:59:43 AM
That is a high honor here, but let's not get too crazy!  Lots of inspiration from Wardweb's site, even got the varglas because I liked the way it looked and without his site I'm sure it wouldn't have turned out as well.   Once I have the base put together I will post some better pics (non-iphone pics).

Thanks
Tim


Pages: 1   Go Up
« previous next »