Goldpoint mounting question

sbelyo · 2161

0 Members and 1 Guest are viewing this topic.

Offline sbelyo

  • Full Member
  • ***
    • Posts: 117
on: October 24, 2014, 08:53:17 AM
I noticed that the notch in the hole for the volume pot is facing the opposite way as the notch on the Goldpoint attenuators.  Unless I'm mistaken?  If so, I have a question for the people that use them.  Did you file a new notch on the opposite side and mount it or is hole big enough to accommodate the notch?



Offline mcandmar

  • Hero Member
  • *****
    • Posts: 1599
  • Not all engineers are civil
Reply #1 on: October 24, 2014, 09:21:50 AM
I dont recall any issues installing mine. I'm not sure there is a left and right, it all depends on the way your looking at it?

Mine is an older model from the mid 90's, i posted some pics of it here http://bottlehead.com/smf/index.php?topic=5316.45

M.McCandless


Offline sbelyo

  • Full Member
  • ***
    • Posts: 117
Reply #2 on: October 24, 2014, 09:48:42 AM
ok, I'm probably just over analyzing.  Just order the kit but I can't open it until Christmas.  Can you say anticipation



Offline JamieMcC

  • Hero Member
  • *****
    • Posts: 1167
Reply #3 on: October 24, 2014, 09:54:07 AM
Just order the kit but I can't open it until Christmas.  Can you say anticipation

That made me chuckle  :D

Shoot for the moon if you miss you will still be amongst the stars!


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #4 on: October 24, 2014, 11:13:49 AM
Goldpoint has information on how to mount the pot under various situations on their website.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline sbelyo

  • Full Member
  • ***
    • Posts: 117
Reply #5 on: October 24, 2014, 12:40:21 PM
Yeah, I saw the nut on the top and bottom technique.  Just wondering if that's what some have done so I can get an extra nut before I start



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #6 on: October 24, 2014, 12:46:47 PM
They should come with 2 nuts.

-PB

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline mcandmar

  • Hero Member
  • *****
    • Posts: 1599
  • Not all engineers are civil
Reply #7 on: October 24, 2014, 12:50:03 PM
Depending on the volume knob used i always pack washers between the pot and chassis plate to get the knob to sit down flush with the panel.  More often than not the locating pin doesn't reach the hole which has never been an issue.

M.McCandless