S.E.X. 2.0 iron upgrade kit now available

Doc B. · 16564

0 Members and 2 Guests are viewing this topic.

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19745
Reply #30 on: July 23, 2013, 01:10:29 PM
Ok, now on to the plate chokes... will these new plate chokes work as ps chokes in the paramour -- 2a3 or 45, and would they be an upgrade over the triad c7x?  Gears are turning.

-- Jim

The C7-X has 10H of inductance, the upgrade iron has 20 or 40H, depending on the tap used, so I would use the C7-X for power supply duty. 

-PB

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline Paul Joppa

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 5832
Reply #31 on: July 24, 2013, 06:23:36 PM
The plate chokes are 2 or 3 times the resistance of the C7-X, so they drop more voltage. And they are designed to handle the output tube plate current. Of course they handle some AC current as well, so they can handle a bit more DC as long as the AC is small (i.e. not in a choke-input filter). At first glance the temperature rise looks OK.

Paul Joppa


Offline Jim R.

  • Hero Member
  • *****
    • Posts: 2194
  • Blind Bottlehead
Reply #32 on: July 26, 2013, 06:26:26 AM
Thanks, Paul, just an idea and I really didn't know the Rdc specs for the various chokes except the c7x, which every bottlehead probably knows is 270 ohms ;-).

Another opt question: is there a way to configure the opt for an 8 ohm load with a primary closer to 5k, instead of 4 or 8?  I knew there are some intermediate taps in there somewhere but no idea what they are.  I'm seriously thinking of putting this opt in the sr-45 as the nickel with the 45 tube seems to be just a bit too sweet.

-- Jim

Jim Rebman -- recovering audiophile

Equitech balanced power; uRendu, USB processor -> Musette DAC -> 5670 tube buffer -> Finale Audio F138 FFX -> Cain and Cain Abbys near-field).

s.e.x. 2.1 under construction.  Want list: Stereomour II

All ICs homemade (speaker and power next)


Offline Paul Joppa

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 5832
Reply #33 on: August 06, 2013, 11:42:53 AM
You can get 5K:16 (roughly) but nothing else.

Paul Joppa


Offline Jim R.

  • Hero Member
  • *****
    • Posts: 2194
  • Blind Bottlehead
Reply #34 on: August 06, 2013, 02:47:04 PM
Thanks Paul, but after thinking about it a bit I decided that I really didn't want to back myself into the 16 ohm speaker category.

-- Jim

Jim Rebman -- recovering audiophile

Equitech balanced power; uRendu, USB processor -> Musette DAC -> 5670 tube buffer -> Finale Audio F138 FFX -> Cain and Cain Abbys near-field).

s.e.x. 2.1 under construction.  Want list: Stereomour II

All ICs homemade (speaker and power next)