Crack #6 Lockwashers

univern72 · 1914

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline univern72

  • Newbie
  • *
    • Posts: 1
on: October 13, 2013, 08:26:43 AM
Hi all,

I'm assembling my Crack and  I have no idea what to do with these 2 #6 lockwashers.

The instructions say the following about the nine pin socket:
Slip a #6 locknut on the screw from the underside and secure with a #4 nut.

I'm assuming "locknut" is supposed to be "lockwasher"? If so, this accounts for one of the lockwashers. Does the other one go on the other nine pin socket's screw? The manual isn't exceptionally clear on this.

Thanks!


Offline sjeffrey

  • Jr. Member
  • **
    • Posts: 39
Reply #1 on: October 13, 2013, 04:01:35 PM
I'm pretty sure that you just put the other lockwasher on the other screw for that socket.  At least that's what I did.


Offline ffivaz

  • Full Member
  • ***
    • Posts: 86
Reply #2 on: October 13, 2013, 10:04:41 PM
Middle picture on page 22 of the manual shows the two locknuts under the two nuts of the 9-pin socket.

Fabien Fivaz

Thorens TD 160, Denon DL-110, Hagerman Piccolo 2, Reduction (w/ Integration), 2A3 Stereomour, Fostex FE126En in Bk12m enclosures
Halide DAC HD, Crack (w/ Speedball), Sennheiser HD 650

Pages: 1   Go Up
« previous next »