Sound fades out then stops

beegee · 1435

0 Members and 1 Guest are viewing this topic.

Offline beegee

  • Newbie
  • *
    • Posts: 2
on: December 01, 2013, 05:58:42 AM
A few days after I built my crack, I started having the sound fade out and then no audio.  The tube was glowing, though.  The sound would come back on after I'd reconnect (or jiggle) the power cable into the board's socket.  Why is this and how can I fix it?  I tried using a different cable and got the same thing.



Offline galyons

  • Sr. Member
  • ****
    • Posts: 626
  • Geary Lyons
Reply #1 on: December 01, 2013, 07:08:45 AM
Sounds like a loose solder joint.  Go back and reflow the joints on the IEC connector.

Cheers,
Geary

VPI TNT IV/JMW 3D 12+Benz LP-S>  Eros + Auralic Aries + ANK Dac 4.1 >Eros TH+ Otari MX5050 IIIB2 > BeePre >Paramount 300B 7N7 > EV Sentry IV-A

Thorens TD124/Ortofon RMG-212/SPU >Seduction > Smash^Up> Paramour 45 MQ >K12's