PLLXO

RPMac · 2420

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline RPMac

  • Full Member
  • ***
    • Posts: 220
on: January 02, 2014, 12:59:38 PM
If I put a .025uf cap in series with the Stereomour inputs, will that give me a 700hz high pass filter?
Intend to drive my mid and tweeter of my heresy speakers.


Offline galyons

  • Sr. Member
  • ****
    • Posts: 626
  • Geary Lyons
Reply #1 on: January 02, 2014, 01:07:10 PM
I would be interested in the line level XO to biamp my EV Sentry IV's.  Paramour 2A3's to bass bin with low pass at 4-500Hz and Paramour 45's high pass at same.  Tried to find formulas on web but only found active.  Most interested in the 45's not seeing the bass frequencies.  The 2A3's could run full into the speaker XO.

Cheers,
Geary

VPI TNT IV/JMW 3D 12+Benz LP-S>  Eros + Auralic Aries + ANK Dac 4.1 >Eros TH+ Otari MX5050 IIIB2 > BeePre >Paramount 300B 7N7 > EV Sentry IV-A

Thorens TD124/Ortofon RMG-212/SPU >Seduction > Smash^Up> Paramour 45 MQ >K12's

Offline Paul Joppa

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 5833
Reply #2 on: January 02, 2014, 02:07:46 PM
@RPMac, I get 64Hz with that cap. 0.00227uF into 100K is 700Hz.

@galyons, the formula is 2*pi*f = 1/(R*C).

Anyone, ping me with an email address and I'll send my PLLC design from 2000. It's a fun and handy tool, though limited in application.

Paul Joppa

Pages: 1   Go Up
« previous next »