SEX 2.0 C4S Instructions Unclear -- Ground Wiring [solved]

eratosthenes · 1684

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline eratosthenes

  • Jr. Member
  • **
    • Posts: 18
on: March 15, 2014, 09:36:39 AM
I just installed the C4S upgrade. The instructions that were included were for the 2.1 kit, but I was able to piece together what was needed, or so I thought.

I have the C4S installed along with the new power supply resistors. Voltage at input of the C4S is about 400v. There is almost no voltage on either OA or OB and LEDs aren't lit. Sound output is minimal.

POSSIBLE SOLUTION: I see the 2.1 instructions include a ground attachment. I don't have this implemented (no clear instructions). What's the next step?
« Last Edit: March 15, 2014, 12:01:51 PM by Caucasian Blackplate »


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #1 on: March 15, 2014, 09:37:59 AM
PM me your e-mail and I'll send you a download link for the SEX 2.0 manual.

-PB

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline fullheadofnothing

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 1487
  • A noble spirit embiggens the smallest man
Reply #2 on: March 15, 2014, 09:39:48 AM
Did you get the kit for 2.0 or 2.1? The kits are quite different, the 2.0 has two boards, the 2.1 has one.

Joshua Harris

I Write the Manuals That Make The Whole World Sing
Kit Packer Emeritus

Offline eratosthenes

  • Jr. Member
  • **
    • Posts: 18
Reply #3 on: March 15, 2014, 09:59:25 AM
Yes, I have the 2.0 kit with separate boards. Yes, there is a ground wire that wasn't implemented (as per 2.0 instructions.)

Everything else is set up just fine. No further desoldering needed.

I will have this fixed shortly.

Thanks.


Offline eratosthenes

  • Jr. Member
  • **
    • Posts: 18
Reply #4 on: March 15, 2014, 11:28:16 AM
Everything is good, now.

The amp is working like it should.

Thanks.


Pages: 1   Go Up
« previous next »