Voltage check on A4,5,9, B7,8 reads 194V. Problem? [solved]

geekosphere101 · 3162

« previous next »
Pages: 1 2   Go Down

0 Members and 3 Guests are viewing this topic.

Offline Mike B

  • Full Member
  • ***
    • Posts: 248
Reply #15 on: March 17, 2014, 04:45:47 PM
Why is being able to have the volume set to zero important?

I do not have one piece of gear with a volume control set to zero.  I never ever set a level control to zero.  That means you get zero sound.


Far away from the bleeding edge

Offline Grainger49

  • Hero Member
  • *****
    • Posts: 7175
Reply #16 on: March 18, 2014, 12:14:30 AM
I think with the Crack folks believe setting the volume at zero will keep the turn on thump from coming through.  That isn't the case, of course since it is on the input.

And I could be wrong. 

But there have been a trickle of volume controls that lift at zero leaving the input "open" recently.
« Last Edit: March 19, 2014, 11:39:45 AM by Grainger49 »


Pages: 1 2   Go Up
« previous next »