Need Help Identifying Capacitor

Yoder · 1699

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Yoder

  • Sr. Member
  • ****
    • Posts: 253
on: April 10, 2014, 03:37:18 PM
I pulled the crossover out of my Klipsch Chorus to see what was there. Everything was pretty straight forward except for two capacitors on the crossover. The capacitors in question are yellow in color and appear to be film capacitors. They have a "TI" stamped on the top, and then "2J 250V" below. They are made in Mexico.

I have spent some time searching the Web, but cannot find anything about the "2J". My question is: does anyone know what the "2J" means and what its modern day equivalent is? Thanks in advance, and I shall down a double stout waiting for a reply!

Cheers.


Offline galyons

  • Sr. Member
  • ****
    • Posts: 626
  • Geary Lyons
Reply #1 on: April 10, 2014, 04:35:16 PM
In EIA capacitor code 2J is 630V. Since they already state 250V, I would say that the 2J is 2uF.  Are there any other letters or numbers as part of the designation?

Cheers,
Geary

VPI TNT IV/JMW 3D 12+Benz LP-S>  Eros + Auralic Aries + ANK Dac 4.1 >Eros TH+ Otari MX5050 IIIB2 > BeePre >Paramount 300B 7N7 > EV Sentry IV-A

Thorens TD124/Ortofon RMG-212/SPU >Seduction > Smash^Up> Paramour 45 MQ >K12's

Offline Yoder

  • Sr. Member
  • ****
    • Posts: 253
Reply #2 on: April 10, 2014, 04:59:45 PM
Here is what it looks like:

TI
2J250V
Mexico

That is all!


Offline fullheadofnothing

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 1487
  • A noble spirit embiggens the smallest man
Reply #3 on: April 10, 2014, 05:32:28 PM
Googling the schematic shows 2x 2µF caps.

Joshua Harris

I Write the Manuals That Make The Whole World Sing
Kit Packer Emeritus

Pages: 1   Go Up
« previous next »