Just received Crack with Speedball, nicely assembled by a gent on head-fi. Came with stock 12au7 supplied by BH (brand unknown, lettering worn off), a Tungsram E80CC, stock GE 6080, and RCA 6AS7G (coke bottle style). I have not used the E80CC. With 12au7 and either the GE 6080 or RCA 6AS7G, the amp sounds fine. However, I swapped in a Tung Sol / Chatham 5998 and, whoa,
extremely loud buzzing. I happen to have four of these 5998 tubes (two I use in a Woo amp, two backups), and with all four tubes, the Crack buzzes like crazy -- the kind of noise that makes you rush to turn it off. I tried three different headphones just to be sure.
Searching the forums, I came across a thread about buzzing noises and other problems caused by some defective transistors in a batch of Speedball kits. One member specifically mentions that by replacing the bad MJE350 transistors, his Crack with 5998 went from "crazy humtastic" to "dead silent." See Reply #110 here:
http://bottlehead.com/smf/index.php/topic,6039.105.htmlSo, does it sound like bad MJE350 transistors might be the likely culprit in the Crack I bought? (The previous owner says he built it "less than 4 months" ago.)
Thanks for any help and advice you can offer.