Help... build finished but voltage error [solved]

Dervin · 1379

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Dervin

  • Newbie
  • *
    • Posts: 5
on: July 30, 2014, 03:00:38 PM
I finished my build (first timer). I have infinite resistance between terminal 12 and 22. (also between any ground point and terminal 22. I have checked, double checked and triple checked the wiring. I can't see anything wrong.

What do i do?

« Last Edit: July 31, 2014, 07:41:59 AM by Caucasian Blackplate »


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19757
Reply #1 on: July 30, 2014, 03:26:04 PM
Triple check how you have the power transformer mounted, especially those start washers. 

How's the resistance from ground to terminal 16?

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Dervin

  • Newbie
  • *
    • Posts: 5
Reply #2 on: July 30, 2014, 03:43:52 PM
Terminal 16 is grounded. Should the transformer frame be grounded? I'm assuming the start washers and backplate washers are intended to isolate the xfmr case from ground?


Offline Dervin

  • Newbie
  • *
    • Posts: 5
Reply #3 on: July 30, 2014, 03:51:48 PM
You're a genius. Completely skipped the part where I need a lock washer under the bolt nearest the safety ground. Thank you so much!!!!!


Pages: 1   Go Up
« previous next »