two test voltages off

zlobby · 1561

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline zlobby

  • Jr. Member
  • **
    • Posts: 14
on: October 22, 2014, 06:38:51 AM
Finally got a couple parts from Eileen to get my speedball back up and running.  Everything seems OK, but there were two voltages that were concerning when I was doing the tests.  They were on terminals 19 and 20

19 should be 0, i read 77.  20 should be 206, I was getting 0.  All the other voltages were OK.


Offline JamieMcC

  • Hero Member
  • *****
    • Posts: 1167
Reply #1 on: October 22, 2014, 06:58:37 AM
Hi I have a feeling these two readings are typos in the speedball manual there was a sticky regarding it on the Crack page but I am unable to locate it.  Wait for confirmation from one of the bottlehead gurus

Shoot for the moon if you miss you will still be amongst the stars!

Offline JamieMcC

  • Hero Member
  • *****
    • Posts: 1167
Reply #2 on: October 22, 2014, 07:05:28 AM
OK found it via a search don't know why it was not showing for me in the sticky section

http://bottlehead.com/smf/index.php?topic=1398.0

Speedball correction

« on: December 30, 2010, 12:12:43 am »
Quote

Here's a typo that managed to sneak in from an early version of the Crack manual due to a copy and paste error:

In the voltage check on page 29, Terminal 20 should read 0VDC and terminal 21 should read 206VDC. Terminal 19 is not a relevant measurement.

Shoot for the moon if you miss you will still be amongst the stars!

Offline zlobby

  • Jr. Member
  • **
    • Posts: 14
Reply #3 on: October 22, 2014, 07:10:03 AM
GREAT! Then the rest of my voltages are within 5%.  Time to plug this puppy in!


Pages: 1   Go Up
« previous next »