Bottlehead Crack transformer buzzing/overheating problem [solved]

bocfan911 · 1704

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline bocfan911

  • Newbie
  • *
    • Posts: 2
on: November 01, 2014, 04:49:11 AM
Hello,

New here and I'm having an issue. I'm testing out my Crack build (no speedball). I've followed the instructions to the letter, checked all my solder connections and when I turn on the amp the tubes glow, but there is a very loud humming noise coming from the actual transformer. Also, the transformer is getting very hot and stays hot for a long time after turning the amp off.

Could someone help me on a starting point to troubleshooting this problem? I am not sure what to look for, and what to measure.

Thanks!
« Last Edit: November 01, 2014, 08:45:19 AM by Caucasian Blackplate »


Offline fullheadofnothing

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 1487
  • A noble spirit embiggens the smallest man
Reply #1 on: November 01, 2014, 05:04:10 AM
Were all of your resistance and voltage checks correct?

Pictures will often be helpful when something is wrong that is not shown by the checks.

Joshua Harris

I Write the Manuals That Make The Whole World Sing
Kit Packer Emeritus

Offline bocfan911

  • Newbie
  • *
    • Posts: 2
Reply #2 on: November 01, 2014, 05:14:12 AM
 :o

Boy I feel a little derp right now. Upon closer inspection I realized that I in fact had one of the UF4007 recifiers with the banded lead facing the wrong direction!

A quick re-solder and problem has been eliminate  :)


Pages: 1   Go Up
« previous next »