Just recieved S.E.X.

jake111 · 1850

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline jake111

  • Full Member
  • ***
    • Posts: 98
on: January 30, 2015, 07:32:00 PM
Hi,
I'm exited to get building, but thinking about getting some powder coating done first.
Is it ok/possible to remove the sheet metal on the plate chokes for powder coating?
I was going to do the chassis plate and the transformer bell also. Are there any negatives about doing this?
Thanks, Jess


Online Paul Joppa

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 5833
Reply #1 on: January 30, 2015, 08:55:43 PM
I just answered this in another thread, but I can't find it now.

No, do not remove the channel frame, that's what holds everything together. Specifically the critical air gap, which is just a paper spacer of tightly controlled thickness.

Paul Joppa

Offline jake111

  • Full Member
  • ***
    • Posts: 98
Reply #2 on: January 30, 2015, 09:31:40 PM
Thank you.


Offline Grainger49

  • Hero Member
  • *****
    • Posts: 7175
Reply #3 on: January 31, 2015, 02:47:23 AM
You can mask off all but the frame and spray paint them. Removing will destroy the choke.


Offline JamieMcC

  • Hero Member
  • *****
    • Posts: 1167
Reply #4 on: January 31, 2015, 05:07:26 AM
I vinyl wrapped the metal frames on my Sex it only took 5 or 10 minuets.

(https://forum.bottlehead.com/proxy.php?request=http%3A%2F%2Fcdn.head-fi.org%2Fd%2Fdc%2F900x900px-LL-dc28156f_038.jpeg&hash=8cd24d42df5f2764705ea72329341eb5c76c6cbc)
« Last Edit: January 31, 2015, 05:09:43 AM by JamieMcC »

Shoot for the moon if you miss you will still be amongst the stars!

Offline jake111

  • Full Member
  • ***
    • Posts: 98
Reply #5 on: January 31, 2015, 06:27:50 AM
That looks great Jamie! I think I'll try that, hope I can get it locally.


Pages: 1   Go Up
« previous next »