270k resistor confusion[solved]

r1c0rtez · 1388

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline r1c0rtez

  • Newbie
  • *
    • Posts: 7
on: December 30, 2014, 09:01:10 AM
I tried to read the whole manual at least twice before assembly but am still confused and even cut both 270k resistor leads prior to running " 270k resistor" (or is it a specific i.e. long lead 270k) through 13u and 12u

would it be equivalent to running this blue jumper wire through the terminal holes?
« Last Edit: December 31, 2014, 11:30:46 AM by r1c0rtez »


Offline r1c0rtez

  • Newbie
  • *
    • Posts: 7
Reply #1 on: December 30, 2014, 09:25:32 AM
figured it out, an easily over read and glazed over photo.

instructions ask for 270w

not 270K


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19757
Reply #2 on: December 30, 2014, 10:42:15 AM
Where is that blue wire going?

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline r1c0rtez

  • Newbie
  • *
    • Posts: 7
Reply #3 on: December 31, 2014, 11:19:58 AM
It WAS going to be jumpered to go to 14u i believe, but i reread the instructions and realized it  was asking for a lead of the 270w resistor and not the 270k the blue wire was being jumpered from.

The blue wire was never jumpered and cut immediately


Pages: 1   Go Up
« previous next »