New Build Pics

ptlud · 3468

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline ptlud

  • Jr. Member
  • **
    • Posts: 33
on: February 02, 2015, 01:16:44 PM
Here are some images of my recently built Stereomour 45 amp.

Paul

Paul

Stereomour 2A3
Modded Toshiba 3950 DVD Player + Schiit Uber Bifrost DAC
JVC A40 Turntable with AT95e + Schiit Mani Preamp
Klipsch KLF-20

Offline wullymc

  • Sr. Member
  • ****
    • Posts: 255
Reply #1 on: February 02, 2015, 03:58:29 PM
Nice looking Paul.

...but please how does it sound! and what speakers will you be using with it?

Dave
Project RPM5.1 with 2M Bronze/Graham Slee Era Gold V/Quickie with PJCSS/Paramount 1.1 300B/Woden Valiant

ODAC/Crack/DT880 600ohm

Current Project:  Beepre!!!

Offline ptlud

  • Jr. Member
  • **
    • Posts: 33
Reply #2 on: February 02, 2015, 04:15:04 PM
The amp sounds great so far.  Assuming it will get better with age...

I am running Klipsch KLF-20 (100 dB/W/m) speakers.  I only need to run at 1/2 volume to fill the room.

I found two sets of 45 ballon tubes for $160.  Radiotron UX-245 and Cunningham CX-345.

I made the following mods as I built the amp.
(1) Replaced coupling capacitors with Sonicraft caps.
(2) Replaced the parafeed caps with 4.7 uF Mundorf Supreme's
(3) Replaced the stock pot with an Alps Velvet pot.
(4) Added a 120V neon indicator lamp.

I had the aluminum faceplate and transformer bell powder coated in satin back.  Well worth the $25.

The kit went together very easily because of the great manual.

Paul

Paul

Stereomour 2A3
Modded Toshiba 3950 DVD Player + Schiit Uber Bifrost DAC
JVC A40 Turntable with AT95e + Schiit Mani Preamp
Klipsch KLF-20

Offline Paul Joppa

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 5834
Reply #3 on: February 03, 2015, 02:00:38 PM
See my note in the other (voltage check) thread.

Paul Joppa

Offline Grainger49

  • Hero Member
  • *****
    • Posts: 7175
Reply #4 on: February 03, 2015, 02:18:54 PM


Pages: 1   Go Up
« previous next »