Resistance Check?

jake111 · 1789

« previous next »
Pages: 1   Go Down

0 Members and 2 Guests are viewing this topic.

Offline jake111

  • Full Member
  • ***
    • Posts: 98
on: February 27, 2015, 11:45:02 PM
My Center pin - input jacks resistance is R 84.5K   L 93.5K. Is this acceptable?
Thanks, Jess


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #1 on: February 28, 2015, 10:10:19 AM
Very much so.

-PB

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline jake111

  • Full Member
  • ***
    • Posts: 98
Reply #2 on: February 28, 2015, 11:12:54 AM
Great! Now the voltage check. 


Offline jake111

  • Full Member
  • ***
    • Posts: 98
Reply #3 on: February 28, 2015, 08:03:02 PM
Voltage checked out mostly good, accept for these might not:

9, 19   49mv, 27mv 
A1, B1  57mv, 30mv   Unless these values can be considered close to 0???

C3   -50mv ish. Kinda changing around like it's a capacitor.



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #4 on: March 01, 2015, 08:23:41 AM
49mV=0.049V, 27mV=0.027V, etc.  These are all very close to 0. 

-PB

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline jake111

  • Full Member
  • ***
    • Posts: 98
Reply #5 on: March 01, 2015, 09:08:32 AM
So everything checked out and sounding good.
Thanks, Jess


Pages: 1   Go Up
« previous next »