Login
Register
Menu
Home
Help
Bottlehead Forum
Bottlehead Kits
Crack
A few screws loose
A few screws loose
Nathan
·
1755
« previous
next »
Print
Pages:
1
Go Down
0 Members and 1 Guest are viewing this topic.
Nathan
Full Member
Posts:
204
A few screws loose
on:
April 10, 2015, 05:56:52 PM
I was taking a close look at my Crack today, which I built last May. I discovered the 4 transformer screws were not tight. I'm sure they were snugged down when I built the Crack. My point is it may be worthwhile to check the screws every so often, and I wonder if a touch of lock tight might not be a bad idea.
Crack/Speedball, SEX 2.1/C4S, Bryston BHA-1
Sennheiser HD600/Cardas cable, Beyerdynamic T1 2nd Gen, Hifimam HE560/Hifiman balanced cable
Grainger49
Hero Member
Posts:
7175
Re: A few screws loose
Reply #1 on:
April 10, 2015, 11:55:14 PM
Transformers vibrate. But I thought Bottlehead used star, lock, washers on the transformers. That should keep the screw/nut from backing off. But I will check my Paramours today. If I find they are loose I will post back.
Thanks for the heads up.
Paul Joppa
Global Moderator
Hero Member
Posts:
5834
Re: A few screws loose
Reply #2 on:
April 11, 2015, 09:12:42 AM
The lock washers should do the job, but it's possible the insulating shoulder washers get compressed, or fit better in their chassis holes, after a few heat cycles. While you're at it, check the RCA jacks, they often loosen up after a while.
Paul Joppa
Nathan
Full Member
Posts:
204
Re: A few screws loose
Reply #3 on:
April 11, 2015, 10:02:31 AM
I've tightend the rca jacks in the past too
Crack/Speedball, SEX 2.1/C4S, Bryston BHA-1
Sennheiser HD600/Cardas cable, Beyerdynamic T1 2nd Gen, Hifimam HE560/Hifiman balanced cable
Adrian
Sr. Member
Posts:
276
Re: A few screws loose
Reply #4 on:
April 11, 2015, 03:55:33 PM
Ditto
I've found items getting loosened due to repeated heatup and cooldown cycles.
It is not uncommon in industry for newly constructed components to change in this manner.
One reason preventive maintenance is important ("fix it" before it requires corrective maintenance).
Adrian C.
VPI Prime w/Ortofon Quintet Black MC/Rothwell MCL Lundahl SUT/EROS/Submissive (3 output mod)/Mainline/Crack - Speedball/S.E.X. 2.1 - C4S/S.E.X. 3.0 - C4S/Paramounts - Blumenstein 2.2 Mini-Max w/DOF mod -Senn HD600/Viso HP50/Focal Elear.
Print
Pages:
1
Go Up
« previous
next »
Bottlehead Forum
Bottlehead Kits
Crack
A few screws loose
Search
Username
Password
Always stay logged in
Forgot your password?