One SAD CRACKHEAD

i luvmusic 2 · 2489

« previous next »
Pages: 1   Go Down

0 Members and 2 Guests are viewing this topic.

Offline i luvmusic 2

  • Full Member
  • ***
    • Posts: 235
on: October 02, 2015, 03:05:26 PM
Unfortunately my CRACK amp transformer is DEAD. :'(


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19764
Reply #1 on: October 02, 2015, 03:43:00 PM
We have had many, many folks come to us requesting replacement transformers.  It is so rare that we have a failed power transformer that our newer kits include instructions on how to test the power transformer (and we have not received a single request for a replacement transformer on any of these kits).

Having said that, how have you arrived at your conclusion? 

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline i luvmusic 2

  • Full Member
  • ***
    • Posts: 235
Reply #2 on: October 02, 2015, 04:40:35 PM
My site trailer was hit by a lightning where i have my CRACK AMP plug in,At the moment the amp is at my local electronics shop  i was informed that my amp is toast.


Thanks


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9662
    • Bottlehead
Reply #3 on: October 02, 2015, 04:53:05 PM
Yeow, it is really hard to say how much damage was done without actually looking at the amp. My suggestion would be to send it to us for repair rather than taking it to a shop that probably won't have the parts needed for the repair.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Offline i luvmusic 2

  • Full Member
  • ***
    • Posts: 235
Reply #4 on: October 02, 2015, 04:59:38 PM
The cost for shipping the amp wont be that cheap,BTW i was communicating with PB via email regarding these.

Thanks


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19764
Reply #5 on: October 02, 2015, 05:21:55 PM
Yeah, lightning will do it. Everything but the wood and top plates needs to go. The tubes may actually be OK too... Maybe...

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline i luvmusic 2

  • Full Member
  • ***
    • Posts: 235
Reply #6 on: October 02, 2015, 05:26:00 PM
So i guess my option is to buy a kit without the chassis and plate?

Thanks,


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9662
    • Bottlehead
Reply #7 on: October 02, 2015, 06:28:01 PM
I don't think we can make a determination of the condition of this amplifier without actually having it on the bench.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Offline i luvmusic 2

  • Full Member
  • ***
    • Posts: 235
Reply #8 on: October 07, 2015, 01:10:52 PM
 Thank You guys for your reply,I found a STOCK CRACK locally however this thing is very noisy but after re-flowing all the solder joints it's dead silent.For some reason i prefer the stock sound.

Thanks again!


Offline ashneel

  • Jr. Member
  • **
    • Posts: 38
Reply #9 on: October 10, 2015, 06:36:16 AM
Quote from: i luvmusic 2 on October 07, 2015, 01:10:52 PM
Thank You guys for your reply,I found a STOCK CRACK locally however this thing is very noisy but after re-flowing all the solder joints it's dead silent.For some reason i prefer the stock sound.

Thanks again!
By stock you mean without speedball?


Offline i luvmusic 2

  • Full Member
  • ***
    • Posts: 235
Reply #10 on: October 11, 2015, 01:17:01 PM
Quote from: ashneel on October 10, 2015, 06:36:16 AM
By stock you mean without speedball?
No Speedball, i just replaced the Volume Pot with the ALPS BLUE VELVET and that is it.


Pages: 1   Go Up
« previous next »