Final voltage check issue [resolved]

divadC · 1211

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline divadC

  • Jr. Member
  • **
    • Posts: 13
on: November 22, 2015, 06:34:12 AM
hi (from a Crack newb)

On the final voltage check I'm coming up with an average of 13V on the Tip terminal and 16V on the Ring terminal (both dropping to zero quickly). I'm concerned as the manual states 9V. All other checks have been fine. Mains is UK 240V.

thanks_dave
« Last Edit: November 23, 2015, 12:38:57 PM by Caucasian Blackplate »


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19764
Reply #1 on: November 22, 2015, 06:35:47 AM
That voltage will vary a bit, depending on the 6080 and some other factors.  As long as it pops back down to 0V, there isn't any cause for concern. 

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline divadC

  • Jr. Member
  • **
    • Posts: 13
Reply #2 on: November 22, 2015, 07:24:14 AM
Thanks Paul


Pages: 1   Go Up
« previous next »