Little help: Speedball small board voltage errors

Mark Ferring · 1886

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Mark Ferring

  • Jr. Member
  • **
    • Posts: 29
on: February 21, 2016, 05:02:46 AM
Been running the standard Crack for a month with no issues. Just started on the Speedball. Built the small circuit board and made it to the first set of voltage checks. The upper right LED did NOT light. Here are the voltages...

OA      150
1A      390
B-A/B   0
1B      390
OB      110

Appreciate any thoughts on my issue.

Mark


Offline Mark Ferring

  • Jr. Member
  • **
    • Posts: 29
Reply #1 on: February 21, 2016, 10:55:17 AM
If it helps. I took a few pictures.


Offline fullheadofnothing

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 1487
  • A noble spirit embiggens the smallest man
Reply #2 on: February 21, 2016, 11:02:19 AM
B side PN2907 is backwards.

Joshua Harris

I Write the Manuals That Make The Whole World Sing
Kit Packer Emeritus

Offline Mark Ferring

  • Jr. Member
  • **
    • Posts: 29
Reply #3 on: February 21, 2016, 11:21:33 AM
Geez.......

Stupid mistake.....thanks for catching it.

Do you think this will cause the part to fail or can I just swap it around?


Offline Mark Ferring

  • Jr. Member
  • **
    • Posts: 29
Reply #4 on: February 21, 2016, 12:25:55 PM
Well, I rotated the transistor and now all the LEDs on the small board are on.....a positive step!

However, my voltages are still as indicated above.

Anyone know what that means?



Offline Mark Ferring

  • Jr. Member
  • **
    • Posts: 29
Reply #5 on: February 21, 2016, 12:26:49 PM
Actually, the voltages are slightly different...

OA      150
1A      380
B-A/B   0
1B      380
OB      150


Offline fullheadofnothing

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 1487
  • A noble spirit embiggens the smallest man
Reply #6 on: February 21, 2016, 04:18:14 PM
Are the LEDs on the 9-pin socket lighting?

Joshua Harris

I Write the Manuals That Make The Whole World Sing
Kit Packer Emeritus

Offline Mark Ferring

  • Jr. Member
  • **
    • Posts: 29
Reply #7 on: February 21, 2016, 04:59:06 PM
Yep, the two on the nine pin are lighting.....as well as all four on the small circuit board.


Offline Mark Ferring

  • Jr. Member
  • **
    • Posts: 29
Reply #8 on: February 21, 2016, 05:01:50 PM
BTW, I will be out most of tomorrow so won't be able to reply if there is any sage advice. Don't want to seem rude!


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19766
Reply #9 on: March 10, 2016, 12:53:18 PM
If you have 380V at IA, you have a loose ground wire in the amplifier (black), as there isn't any way to get voltage that high in your amplifier (your meter is struggling to resolve the voltage because of a bad connection in the amplifier).

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Pages: 1   Go Up
« previous next »