help with schematic

aragorn723 · 1624

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline aragorn723

  • Hero Member
  • *****
    • Posts: 1024
on: April 22, 2016, 04:33:24 PM
Hi,

I'm having trouble reading the attached schematic.  What should be connected to the "off" terminals of the switch?  Is it points LS and RS? 

Thanks,

Dave


Offline RayP

  • Sr. Member
  • ****
    • Posts: 301
Reply #1 on: April 23, 2016, 02:50:07 AM
Looking at the schematic, it appears to be a way of passing some of the left channel signal to the right channel and vice versa.

My guess is that nothing should be connected to the 'off' position. LS and RS are connected to the 'on' position.

More info on what the circuit is supposed to do would help.

ray

Ray Perry

Offline aragorn723

  • Hero Member
  • *****
    • Posts: 1024
Reply #2 on: April 23, 2016, 02:57:49 PM
The circuit is for a 3d preamp.  It was originally posted here:

http://bottlehead.com/smf/index.php?topic=6406.0

The switch in the pictures looks different than mine (i'm using a DPST switch, whereas the pictures in the original post have 6 terminals).  Thanks,

Dave


Offline Tubejack

  • Full Member
  • ***
    • Posts: 113
Reply #3 on: April 24, 2016, 05:02:33 AM
Your switch s/b fine.  In the original pic there is nothing connected to the other side (2 terminals) of the DPDT switch.

There are 10 types of people in this world,
Those that understand Binary and those that Don't!

Offline aragorn723

  • Hero Member
  • *****
    • Posts: 1024
Reply #4 on: April 24, 2016, 02:45:51 PM
ok cool.  So is hooking up the switch as easy as hooking up the "off side" of each to RS and LS, and the on side to RO and LO?  Thanks,

Dave


Pages: 1   Go Up
« previous next »