new to bottlehead

tipatina · 1911

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline tipatina

  • Jr. Member
  • **
    • Posts: 42
on: July 21, 2016, 03:53:33 PM
I am considering this kit to use as a phono pre with grado reference sonata MM/MI. I am not totally new to kit building-this would be my second kit as I have recently finished building the Akitika 101 solid state power amp. I used this iron:
Stahl Tools SSVT Variable Temperature Soldering Iron Station and Kester 60/40 .031" Solder
Will this basic equipment along with tools and multimeter be sufficient?
Will this phono stage be ok with the grado wood body 5mv output?
Thanks


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9657
    • Bottlehead
Reply #1 on: July 21, 2016, 05:38:40 PM
Yup, those tools are fine and the Eros will work well with your cartridge.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Pages: 1   Go Up
« previous next »