starting rebuild on crack

mike langer · 1744

0 Members and 1 Guest are viewing this topic.

Offline mike langer

  • Jr. Member
  • **
    • Posts: 15
on: August 15, 2016, 02:02:15 PM
Hi everyone,
My sad story is that I did such a poor job on my first crack kit that all the electronics had to be replaced.I have received my new parts and am seeking advice on how to proceed correctly.I want to avoid the errors I made and produce a great build.Would one of you please hold my hand for the first step or two?
Thanks to all,mike



Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9642
    • Bottlehead
Reply #1 on: August 15, 2016, 02:35:28 PM
The best advice I can give is to make an effort to copy the way the amp in the manual looks as closely as you can. Along with the obvious - getting all the connections on the proper terminals - that also includes matching wire lengths, routing, the look of the solder joints, and making sure all the fasteners are snug.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.


Offline ALL212

  • Sr. Member
  • ****
    • Posts: 542
Reply #2 on: August 15, 2016, 02:48:13 PM
Just take your time.  These are fun to build and sound amazing.  If you get stuck don't just bull ahead - stop and ask questions here.

Aaron Luebke


Offline rockpassion

  • Full Member
  • ***
    • Posts: 160
Reply #3 on: August 15, 2016, 03:56:17 PM
Mike,

I am sure you are tired of hearing this but take your time.  Do not try to finish it in one night.  When you start getting blurry eyed or frustrated stop.  If you cannot figure out what the manual is telling you stop, reread the instructions and/or ask for help here on the forum. 

I found part of the fun was finishing these kits and then firing them up.  I have built 4 kits and took my time and everyone fired up the first time.  I am old and my hands shake when I do close detail work.  Also, my sight is suspect.  But I read and reread the instructions.  When I finished one part I would retrace all the steps and make sure I did it right and it would take 2-3 weeks to finish. 

So good luck, have a drink ready when you finish a session and ask for help when needed. 

Richard

Richard Vince

VPI MkIV, Woody Tonearm w/Shelter 501 MkII Cart. w/Soundsmith rebuild, Cinemag CMQEE-3440A SUT, Eros Phono Preamp, Beepre Preamp , QuickSilver V4 Amps, DIY 89259 Speaker Cables  & interconnects, VH Audio Power Cables, OPPO 205 Player, DIY 3 way speakers


Offline Jamier

  • Sr. Member
  • ****
    • Posts: 382
Reply #4 on: August 16, 2016, 08:02:47 AM
These kits are so fun to build, but working in tight spaces can become fatiguing. When you start to feel that fatigue approaching, unplug that soldering iron and walk away for a while.It does not matter how fast you build that kit.

James Robbins


Offline mike langer

  • Jr. Member
  • **
    • Posts: 15
Reply #5 on: August 16, 2016, 07:48:30 PM
Thank you all for the encouragement  - it makes me feel capable of doing it!
 Again thanks,mike



Offline Natural Sound

  • Sr. Member
  • ****
    • Posts: 998
Reply #6 on: August 16, 2016, 11:42:38 PM
Great advice everyone. The only thing I might add is that you give us a general location of where you live. That way if you get in a bind someone local (if applicable) can lend a hand. Good luck and enjoy the journey.



Offline mike langer

  • Jr. Member
  • **
    • Posts: 15
Reply #7 on: August 17, 2016, 08:00:17 PM
Hi everyone,
I live near downtown St.Louis ,in an area called Lafayette Park [the park itself is very historically significant  as is the neighborhood being very close to the Mississippi River.
I love most audiophiles and welcome any of you to come visit and listen to my set up. If you like contact me at [email protected] and we can arrange it. I am ready to begin and will start with a parts count and match. That is all for my first step. Please keep the suggestions and tips coming! Feeling a part of this quality group of people makes the job easier.
Thanks once more,mike



Offline 2wo

  • Hero Member
  • *****
    • Posts: 1260
  • Test
Reply #8 on: August 18, 2016, 11:14:55 AM
Use some of the old parts and some bits of wire and practices your soldering skills...John

John S.


Offline mike langer

  • Jr. Member
  • **
    • Posts: 15
Reply #9 on: August 20, 2016, 06:24:54 PM
i am paying attention to all the suggestions  thanks evryone