When should I turn my amp off?

pemberley · 1228

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline pemberley

  • Newbie
  • *
    • Posts: 2
on: December 07, 2016, 08:08:08 AM
Should I turn my amp off whenever I'm not using it, or only when I'll be away for an extended period of time?

Which puts more wear on the tubes, running idle for several hours or getting power cycled?

In case it matters, I've got a Crack with Speedball.

MOTU 16A -> Crack with Speedball -> HD600

Offline Zimmer64

  • Full Member
  • ***
    • Posts: 210
    • Blog
Reply #1 on: December 07, 2016, 08:49:37 AM
I switch my amps off if I don't plan listening in tne next hour and definitely when I leave the house.

Michael

Nelson Pass F5 Turbo V2, Quickie (mod), S.E.X. 2.1, Tubes4hifi SP14, Dynaco VTA ST 70, Tubelab SSE, Vroemen Diva Superiore ER4, Jordan JX92S VTL, 47 labs 0647 CD, Aqvox DAC, Rowen Absolute pre / psu / power amps, BG Neo3 / Betsy / Eminence A15 open baffles

Offline ToolGuyFred

  • Full Member
  • ***
    • Posts: 89
Reply #2 on: January 11, 2017, 04:47:05 AM
I tend to leave the preamp powered up if I'm going to use it in the next few hours. The headphone amp and power amps I'd agree with an hour. From a safety standpoint, treat all tubes with the same caution as an open flame (candle, kerosene lamp etc.) so if I'm out of my listening room then all off.

John
Amateur Audiophile and Backstreet Boffin.
Original Foreplay with C4S + Sweet Whispers
ParaSEX amps with MQ nickel-cored outputs
Factory-built Lowther Acousta 115s with silver-coiled DX3s, wired in DNM solid-core
KEF active sub (help for the last couple of octaves).
Bottlehead DAC on batteries.

Pages: 1   Go Up
« previous next »