Crack with Speedball - Sound gone in left channel

ajswaagman · 1243

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline ajswaagman

  • Newbie
  • *
    • Posts: 5
on: April 10, 2017, 01:26:28 PM
Crack with speedball had worked well for about 3 weeks.  Today i there is no audio in the left channel except for some noise/popping occasionally.  All LED's light up except D1 on board B pictured.  It also appears that the D1 LED is charred if you look closely.

Thanks for the help!


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19772
Reply #1 on: April 11, 2017, 11:49:09 AM
How are your voltages?

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline ajswaagman

  • Newbie
  • *
    • Posts: 5
Reply #2 on: April 12, 2017, 03:34:16 PM
Now the LED is lit and the amp works fine.  it does look like the D1 LED on the B board illuminates more from the bottom than the top, so maybe i missed it initially in a room with more light?

I guess i'll monitor the amp and see if the left channel drops out again.  Both times(left channel not working/amp working) the amp had just been turned on so it doesn't seem like a bad solder joint heating up and failing or filling properly and working.

voltages
1: 73.7
2: 182.6
3: 0
4: 182
5: 71.5
6: 0
7: 104.2
8: 0
9: 103.2
10: 0
11: 0
12: 0
13: 181
14: 0
15: 201
20: 0
21: 220


Pages: 1   Go Up
« previous next »